How to show interface running speed ?

[Register_Security]

I want to know the command to show "running speed" of interface include physical and "ae" interface ?

Please help me

Thanks

[kdd]

Hi Register_Security

how about this cli:

show interface ethernet1/1

there you will find wire-speed and much more data

Regards Klaus

[Phoenix]

Hello Register_Security

When we run a command as below

" show interface ethernet1/x"

we see the selected results as shown

Link status:

  Runtime link speed/duplex/state: 1000/full/up

  Configured link speed/duplex/state: auto/auto/auto

This indicates the configuration was made for Speed, Duplex and State to be auto and on runtime they were negotiated to 1000 / full / UP respectively.

The command syntax will be the same for all interfaces such as Aggregate ethernet, subinterface , logical interfaces and so on.

Thanks

[Register_Security]

Thanks for all reply, but what I want to see

How many are Mb/s running on each interface ?

when I show interface eth1/1

The result is below, I want to know "real running speed" (Mb/s) for Transmit and Received.

Physical port counters read from MAC:

--------------------------------------------------------------------------------

rx-broadcast                  249640

rx-bytes                      4516648362570

rx-multicast                  0

rx-unicast                    12291399844

tx-broadcast                  25

tx-bytes                      17829203228051

tx-multicast                  0

tx-unicast                    19161430846               

--------------------------------------------------------------------------------

Hardware interface counters read from CPU:

--------------------------------------------------------------------------------

bytes received                           4467481764870

bytes transmitted                        120

packets received                         3701714897

packets transmitted                      2

receive errors                           956

packets dropped                          0       

[VinceM]

Hi

Keep in mind that lotof stuff are possible through API.

Try: Chrome Web Store - Pan(w)achrome

Hope help.

V.