How to view SFP installed on a Panorama or Logcollector

[PktBlocker]

Does anyone know how to view the sfp installed on an m500/600 panorama or log collector?

I have tried the below command and even put a wildcard on it but it only gives me hard drive info.

> show system state filter sys.sX.pY.phy

[MP18]

please try below link

https://live.paloaltonetworks.com/t5/Operations-Documentation/810-000096-00E-Reference-Transceiver-H...

[PktBlocker]

thank you for the transceiver list but the question is "How to view SFP installed on a Panorama or Logcollector ?"

[rmfalconer]

Maybe try a match instead of a filter? That might get you the info also.

show system state | match phy

[PktBlocker]

tried that and got nothing. I think the way they monitor interfaces on this chassis is different than the firewalls.

[MP18]

might be need to see if someone replies here.

[MP18]

i tried on panorama 

show system state filter sys.s1.p*.phy

'sys.s1.p*.phy': NO_MATCHES

[PktBlocker]

running the command noted will not produce the interfaces on the panorama or log collector, this is why you show a NO_MATCHES. Hopefully someone from PA will chime in with some knowledge on the topic.