I would like to Restore configuration from 9.1 version 3020 firewall to 10.1 version 440 firewall.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

I would like to Restore configuration from 9.1 version 3020 firewall to 10.1 version 440 firewall.

L0 Member

Can I just export the configuration from the 3020 running 9.1.8 and import into the 440 firewall running 10.1.8?  Do I need to downgrade the 440 to 9.1?

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hello @Erich_Smith

 

thanks for the post!

 

The lowest PAN-OS version that you can run on PA-440 is PAN-OS 10.1, so you will not be able to downgrade. Here is a support matrix for reference: Supported OS by Model.

 

By importing the configuration from PA-3020 to PA-440 will almost certainly result commit errors. Here is a discussion with exactly the same scenario: https://live.paloaltonetworks.com/t5/general-topics/how-to-migrate-of-existing-config-rules-from-pa-...

Could you go through the thread to see it can help you?

 

Kind Regards

Pavel  

Help the community: Like helpful comments and mark solutions.

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hello @Erich_Smith

 

thanks for the post!

 

The lowest PAN-OS version that you can run on PA-440 is PAN-OS 10.1, so you will not be able to downgrade. Here is a support matrix for reference: Supported OS by Model.

 

By importing the configuration from PA-3020 to PA-440 will almost certainly result commit errors. Here is a discussion with exactly the same scenario: https://live.paloaltonetworks.com/t5/general-topics/how-to-migrate-of-existing-config-rules-from-pa-...

Could you go through the thread to see it can help you?

 

Kind Regards

Pavel  

Help the community: Like helpful comments and mark solutions.
  • 1 accepted solution
  • 1115 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!