Inbound NAT for multiple VMs through single Azure firewall
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

The Enhanced LIVEcommunity Experience is finally here! Learn all about it.

Inbound NAT for multiple VMs through single Azure firewall

L0 Member

Hello,

 

One of my customer purchased an instance Azure VM-300 firewall recently. The customer has approximately 25 applications in the Azure network and they need to publish these applications to the internet users through the Palo Alto firewall. Each of these VMs have a public IP and the customer need to retain these IP addresses since they have already registered these IPs in the public DNS. How to move these IPs to the untrust interface of Palo Alto VM?. Kindly advise the routing and natting design in such a scenario.

 

Thanks 

Shabeeb

1 REPLY 1

Cyber Elite
Cyber Elite

Hello

 

What you are referring to, could be found in the deployment guides on PANWs website.

 

here is a link to help you get started with the supported deployment types.

 

https://docs.paloaltonetworks.com/vm-series/10-0/vm-series-deployment/set-up-the-vm-series-firewall-...

 

Good luck and let me know what other questions we can answer for you.

 

 

Help the community: Like helpful comments and mark solutions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!