Inbound NAT using IPV6 to ipv4

Showing results for 
Search instead for 
Did you mean: 

Inbound NAT using IPV6 to ipv4

L2 Linker

Hi Team,


We want to use ipv6 on untrust interface and server has belong to DMZ zone with ipv4 address, before we have published my server over internet using only ipv4 to ipv4 


Now i have query that-

1) what steps we have to prefer to achieve inbound NAT from ipv6 to ipv4.

2) If i will configure ipv6 on untrust interface should we establish global protect tunnel or we will face any challenge.



Cyber Elite
Cyber Elite


What you are looking for is a NAT64 NAT rulebase entry. The configuration is essentially what you are used to currently, it's just a different NAT Type that you need to select. Once you add the IPv6 address to your untrust interface that won't have any effect on your existing GlobalProtect configuration. 

I have published my my sever over internet if i will change public ip address to ipv6 and will create inbound NAT64 is it will work.
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!