Interfaces in power-down state

cancel
Showing results for 
Search instead for 
Did you mean: 

Interfaces in power-down state

L0 Member

Hi all...I have a Palo Alto Active/Active pair and the HA3 link between them is down. Will PANOS then power-down all other physical interfaces when the HA3 link is down. Just looking for confirmation that this is expected behaviour or whether I have something more serious happening to this 3260. Any advise would be greatly appreciated

 

name id speed/duplex/state mac address
--------------------------------------------------------------------------------
ethernet1/1 64 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:40
ethernet1/2 65 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:41
ethernet1/3 66 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:42
ethernet1/4 67 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:43
ethernet1/5 68 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:44
ethernet1/13 76 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4c
ethernet1/14 77 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4d
ethernet1/15 78 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4e
ethernet1/16 79 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:4f
ethernet1/17 80 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:50
ethernet1/21 84 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:54
ethernet1/22 85 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:55
ethernet1/23 86 ukn/ukn/down(power-down) 8c:36:7a:b1:9d:56
ha1-a 5 1000/full/up 08:66:1f:04:cf:92
ha1-b 7 ukn/ukn/down(autoneg) 8c:36:7a:b1:9d:07
vlan 1 [n/a]/[n/a]/up 8c:36:7a:b1:9d:01
loopback 3 [n/a]/[n/a]/up 8c:36:7a:b1:9d:03
tunnel 4 [n/a]/[n/a]/up 8c:36:7a:b1:9d:04
hsci 8 ukn/ukn/down(autoneg) 8c:36:7a:b1:9d:08

1 REPLY 1

Cyber Elite
Cyber Elite

I do not believe it is expected behavior to admin down all interfaces because the HA3 link going down.  Not sure why you would see a "power down" vs an "admin down" for interfaces, so further investigation is warranted.

Help the community: Like helpful comments and mark solutions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!