internet ipv6 to on-premise ipv4 nat

Reply
L3 Networker

internet ipv6 to on-premise ipv4 nat

Hi all,

 

there is a domain abc.com and there is an ipv6 dns record for that.so when using ipv6 from cloud is it possible to destination nat this to the ipv4 server inside.

 

I know as a workaround we can add an ipv6 ip to that server but it is not possible now.

 

 

(INTERNET)ipv6 (client)----- ipv6 FW  ipv4 ---- ipv4(server)

 

 

Regards

 

Cyber Elite

@PanIst,

Link you are looking for a NAT64 rule where this is easily done. 

You can find information on how to configure that HERE

L3 Networker

hi

 

it is(the document) from trust to untrust we already checked that.My question is different.opposite of that.

 

Regards

 

L0 Member

Resurrect this old thread,

@PanIst Did you figure out if this can be done?

Untrust to Trust one to one nat64

 

Our server has a valid  "AAAA" record:

We do not want to convert IPv4 to IPv6 and then NAT64 it as described in the available materials.

 

Internet >    2001:56b:f:1600::3 > FW NAT64 > IPv4 ] > 192.168.0.10 Server

 

Thanks!

 

 

 

 

Tags (2)
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!