12-07-2012 03:24 PM
I am attempting to setup an IPSec VPN tunnel to connect to remote Avaya phones. I am not sure if I am doing it correctly. I've set up a new IPSec tunnel and configured it to use dynamic IP for remote peers. I am not sure if this is correct or not. It seems to me this would be for a site-to-site VPN. I believe I am looking for more of a client VPN tunnel to connect the Avaya phone to. Any thoughts or ideas would be appreciated.
04-20-2023 05:20 AM
Hi,
To setup VPN Tunnel for Avaya IP Phones, you just need to configure RemoteVPN (GlobalProtect) and need to enable x-auth, thats it. X-Auth is the feature which is must to connect the Avaya IP Phones (as it considered as 3rd party vpn client). You dont need to have GlobalProtect license as Avaya IP Phones Operating Systems dont fall in Mobile/Tablet devices.
I just implemented in April 1st Week. I was migrating all Avaya IP Phones VPNs from Cisco ASA to PaloAlto firewalls and it worked without any issues.
04-20-2023 05:33 AM
I can say, YES we support VPN for Avaya IP Phones. We just need to enabled "x-auth" option. No additional configurations/setting required. Not even GlobalProtect License required for setting up VPN Tunnel for Avaya IP Phones.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
