[ipv6] traceroute gives link-local address

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

[ipv6] traceroute gives link-local address

L0 Member

I've setup ipv6 routing on a PA-2050 (software 4.0.4). When I do a traceroute from a client I always see the link-local address off the PA instead of the unicast adress. Does anyone know how to change this?


2     2 ms     1 ms     1 ms  2001:6a8:2500:10::1
3   <1 ms   <1 ms   <1 ms fe80::21b:17ff:fe00:3f13 <----- ????
4     1 ms     1 ms     1 ms  ge.m20.access.brussels.belnet.net [2001:6a8:2400
8000::1]

2 REPLIES 2

L4 Transporter

1) Can you let us know the topology of your network?

2) Is 2001:6a8:2500:10::1 redirecting the traffic to PAN?

3) If yes can you please let us know what equipment is  2001:6a8:2500:10::1?

Thanks

In attachement I included a network topology map.

  • 2549 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!