Is configuration file from 2050 device can be imported and loaded to 5050 device?

[Gururaj]

Hi All,.

As we are upgrading the device from 2050 to 5050, Is configuration file from 2050 device can be imported and loaded to 5050 device? or from any xxxx series to yyyy series.

regards,

Gururaj

[panos]

Hi,

yes you can but you'll get some warnings and you have to check them.

I already made reverse of that.Especially interfaces should be checked.

Sometimes you have to edit the xml by hand and it works.

[Gururaj]

Thanks panos,.

How to edit XML? can you give some example about what you have edited and how you identified that what needs to be edited?.

regards,

Gururaj

[panos]

sometimes after loading the configuration we could not commit.I saw the warnings on the commit and deleted some undefined objects from xml which were already deleted from gui but they were not deleted from config(don't know how) this happened for different devices different times.3020 to 5020 for example.

[Gururaj]

Below is the error i am getting,... you mean i need to delete zones and Vwire in this case?

Regards,

Gururaj

[harshanatarajan]

If using HA, make sure to change the HA to the dedicated ports in 5050.

What needs to be edited ?

It depends on what error you get. You would sometimes get an error stating as "invalid reference".

[panos]

if loaded config is fine for you then export the candidate and delete the vwire for eth1 and eth2 thing at all

also search for "deleted" in xml you will see outside zone named.Delete this also