Is it normal for the captive portal zone be displayed on BGP sessions? Not using CP?

cancel
Showing results for 
Search instead for 
Did you mean: 

Is it normal for the captive portal zone be displayed on BGP sessions? Not using CP?

L1 Bithead

The session browser logs display BGP port 179 sessions trying to connect to the same destination peer address, in 2 different zones, the correct zone and the captive portal zone, is this normal? We are not using Captive Portal, but I do see it enabled under Device>User Identification>Captive Portal Settings.

2 REPLIES 2

L7 Applicator

Is BGP being used on the internal network?

This is likely caused by User Identification being enabled on the zone where your BGP isset up. if this zone does not need to have inbound connections matched against user-ID (typically the untrust or some kind of external zone), you can disable that option in the zone configuration

Tom Piens
PANgurus

L0 Member

It is normal. Captive portal as destination zone in session browser even if it is disabled.

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clu4CAC

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!