ISP Router connection best practice
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

The Enhanced LIVEcommunity Experience is finally here! Learn all about it.

ISP Router connection best practice

L1 Bithead

Hi All,

 

Just looking for advise , pros vs cons about connecting an ISP internet feed directly to our core mpls/vpls switch.  

ISP Internet Router—>adva—>Core Switch(siteA)—>mpls/vpls—>Core Switch(siteB)—> Palo Alto

 

The PA firewall will have a separate VR and will nat traffic from 10.x LAN to Public before routing out to Internet via core.  

There is ospf routing on all cores and distribution switches connecting to cores as well as L2/L3 traffic from other sites.

 

Is this acceptable and what are the security concerns? 

 

 

 

 

 

2 REPLIES 2

L2 Linker

Hi Mate,

I am not sure about the other networks connected to your core, but the basic priniciple is to have your firewall as close to the perimeter as possible. Firewall is your first line of defence and not last.

 

It is a better design to filter all the traffic through firewall on site A, before being sent out to site B. 

 

So what you have is feasible, but your call where you would like to have it. For me site A makes more sense.

 

Regards,

Varun Rao



Thanks & Regards,
Varun Rao

Hello Varun,

 

Even if the static routing ensures that traffic gets routed directly to the firewall ? 

Regards,

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!