Issue with GP VPN

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Issue with GP VPN

L4 Transporter

Hello,

 

We have setup GP VPN and it works, VPN client can talk to network.

However, if we take initial from internal work to VPN client, it is not working. 

For example, when VPN enabled, I got an IP: 192.168.246.9, and it can reach server: 192.168.16.31
However, if I ping or rdp to 246.9 from 16.31, it doesn’t work.

 

Is this expected?

If not, how to solve this?

4 REPLIES 4

L7 Applicator

You will need an outgoing policy to allow ping and rdp from your internal network to your GP clients/zones etc...

Hi @Mick_Ball 

 

Yes, there is a policy from server to VPN Client and it works.

 

What else can we check?

Take a look at the allowed traffic, is the NAT working correctly.

 

could yourun wireshark on the client to see if packets are reacching it.?

L1 Bithead

The problems aren’t actually in the configuration but are in the target network where the system is that you’re trying to reach, or even in the target system itself. But in order to reach such a conclusion, you need to eliminate possibilities by doing tests that eliminate possibilities until a conclusion emerges that you can use to effectively resolve the issue.

 

There are some tools that will be helpful in trying to visualize the traffic and testing which path traffic follows, namely these;

  • TCPdump – Linux command line tool to visualize network packets
  • WireShark – Windows GUI tool to visualize network packets
  • ping – a Testing tool to determine if a message can be sent back and forth between source and destination
  • traceroute – Similar to the above but tries to determine every hop between the source and the target destination
  • 3072 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!