- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
07-30-2024 04:01 AM
Hi all,
I have deployed a new Palo and configured LDAP auth but I am getting an error. I checked the BIND account is active and all settings appear ok, anything else to troubleshoot this?
Reason: Internal error, e.g. network connection, DNS failure or remote server down.
07-30-2024 04:37 AM
the destination LDAP server is allowed to authenticate users? (RODC will not be able to perform this function i think)
- do you have service connections configured?
- did you double-check connectivity is allowed (in the ldap profile, click the 'Base DN' dropdown to see if the domain loads)
- run a tcpdump from cli listening for port 389 or 636 to see if your connections go out and get replied to
07-30-2024 07:16 AM
Thanks for your reply Reaper.
Where would I configure service connections, I do not think I have done that part..
Also for checking connectivity there is no drop down option within the ldap profile as seen below..
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!