leaf and spine and security
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

The Enhanced LIVEcommunity Experience is finally here! Learn all about it.

leaf and spine and security

L4 Transporter

Hi,

In a spine and leaf ( vpc ) ,where we should place the firewall  to protect the data center ? 

If  we use layer 3 firewall  all routing  process will be shifted to the fw, spending huge amount on spine won't be beneficial ? 

Layer 3 or layer 2  recommended ?

Thanks

1 REPLY 1

Cyber Elite
Cyber Elite

Hello,

Here is where zero trust comes into play. In the past it was frowned upon to have the firewall be the center of the network. With zero trust, you are essntially doing just that. Now based upon your question, i assume you are using Cisco Nexus. If you plan on using ACI then you are stuck with the 9K series. If you are just using swtiches for switches, then the 3K's would work and the firewall would need to be speced to handle all the routing traffic.

 

https://www.paloaltonetworks.com/cyberpedia/what-is-a-zero-trust-architecture

 

Hope that helps.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!