11-09-2021 07:30 AM
Hi,
We have a customer using panorama to manage few clusters.
For one of the location , they have just added the firewall to panorama .
So we have to load the firewall to panorama and then it shows the local config like policy nat etc
It is same like going directly to firewall and do the changes locally.
Now customer want to make use if device groups and templates .
I can crate DG and template but how to import the configuration to DG ?
Is there any procedure to do it . We don't want any outage here .it is just that we want to manage everything via panorama through DG and templates.
11-09-2021 07:36 AM
Hello ,
Please, check it and informe me if is useful for you.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CloRCAS
Regards
11-09-2021 07:36 AM
Hello ,
Please, check it and informe me if is useful for you.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CloRCAS
Regards
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
