M500 Change Log Collection Interface from the Management to the Dedicated Eth 1 and 12

Announcements

Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

Reply
MP18
Cyber Elite

M500 Change Log Collection Interface from the Management to the Dedicated Eth 1 and 12

 

Currently we have 2 M500 running in log collector mode.

 

All the Firewalls are sending logs  to M500 on its Management interface .

Panorama M100 also talk to M500 via its Management interface.

 

Currenly seems our traffic has increased and we are send lot of logs to M500 on its Management Interface.

 

So I need to use Eth1 and Eth2 on each M500 for log collection

 

Need to know if this is possible now without causing major outage?

 

 

MP
1 ACCEPTED SOLUTION
BPry
Cyber Elite

@MP18,

The modification to the interfaces will disconnect the firewalls momentarily until you get everything updated. However, that won't effect anything vital to traffic flow and won't cause any outage to network traffic. The logs will cache on the firewall and once you have them pointed at the new IP the logs will be transported to the M500 as expected. 

 

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!