Management CPU Utilization is 100%

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Management CPU Utilization is 100%

L1 Bithead

Our PA-500 management utlization reaches 100% sometimes...according to PA support, There's a process called 'gdindex.sh' runs every 15 minutes for log indexing.

We need to reduce the management plane traffic for better performance. Any suggestions?

1 REPLY 1

L7 Applicator

I think there was probably a typo from support, it's most likely "genindex.sh" which runs every 15 minutes to create summary reports. There's quite a bit you can do to reduce some of those. Here's a good article on some steps that can help:

https://live.paloaltonetworks.com/t5/Featured-Articles/Tips-amp-Tricks-Reducing-Management-Plane-Loa...

 

The last part talks specifically about the reports, but the whole article is pretty helpful.

  • 15001 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!