Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-12-2013 01:31 AM
Hi All
I am using PA 5050 with PAN OS 5.0. PA is automatically refreshing FQDN evrery 30 min. I want to refresh the FQDN manually or reduce the refresh time less than 30 min. How can I do this . Please can anyone suggest me how to do it .
Thanks
03-12-2013 02:45 AM
Hi,
In configure mode, to set the refresh interval
# set deviceconfig system fqdn-refresh-time
I believe the min time is 5 minutes. To force a refresh
# set deviceconfig system fqdn-forcerefresh-time
These are for 4.1 but assume still valid for 5.0
Regards
Lee.
03-12-2013 02:45 AM
Hi,
In configure mode, to set the refresh interval
# set deviceconfig system fqdn-refresh-time
I believe the min time is 5 minutes. To force a refresh
# set deviceconfig system fqdn-forcerefresh-time
These are for 4.1 but assume still valid for 5.0
Regards
Lee.
03-12-2013 03:21 AM
Hi,
To refresh manually following cmd might be helpful.
>request system fqdn refresh
or
>request system fqdn refresh force yes
Regards,
03-12-2013 09:43 AM
The minimum fqdn refresh interval supported is 30min:
# set deviceconfig system fqdn-refresh-time
<value> <1800-14399> Seconds for Periodic Timer to refresh expired FQDN object entries
As emr suggested, to refresh manually refresh the fqdn:
> request system fqdn refresh
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
