02-16-2023 02:29 AM - edited 02-16-2023 04:40 AM
Hello,
How can I get MGMT to ping to the LAN port?
Any help is appreciated.
02-16-2023 08:10 PM
Can you send screenshot of management interface settings (Device > Setup > Interfaces > Management)
02-16-2023 09:02 PM
But you are not routing traffic from management interface to server through Palo.
If management interface had default gateway 10.2.100.55 it would send traffic to ethernet1/1, through Palo and towards server (192.168.30.1).
You are sending traffic to 10.2.100.254 that is some other device not previously discussed in this thread.
02-16-2023 09:18 PM
Hi @Raido_Rattameister ,
Please refer to the picture below, is it true that "MGMT ping to Server" can only take the blue path to the server, while the red path is not possible?
02-16-2023 09:21 PM
Traffic can only take blue path.
There is no interconnection or routing between management module and dataplane (LAN on your diagram) inside Palo.
Packets from sourcing from management interface physically leave management interface to get to the destination.
02-16-2023 09:27 PM
Ok, I see. Thank you for your help.😄
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
