Migrating server from port based firewall to Pal Alto

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Migrating server from port based firewall to Pal Alto

L3 Networker

My company is moving a few servers from an old data center with an ASA to a new data center with a Pal Alto.  A lot of the rules for the old server on the old firewall are showing port numbers only.  I would like to use application ID as much as possible and don't know how to find out what applications use these ports.  I know I can google a port list and find what the port number is typically used for but app ID on the palo alto is often abbreviated and may not appear the same way as on the googled port list.  How can I simply find out what ports use which app ID's in the Palo Alto so that I can use app ID instead of port based?

2 REPLIES 2

Cyber Elite
Cyber Elite

Hello,

In a nustshell, put the port based polciies into the PAN and then watch the traffic. Start creating new policies above the port based one with applications until the port based one is no longer getting hit or you are satisfied with the application based policy.

 

Regards,

  • 2607 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!