Migration Cisco to PAN

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Migration Cisco to PAN

L0 Member

Hello,

I have run a config through the migration tool and I have noticed the following application generate warnings-

 

icmp-  I understand I change this to- ping

ipsec-esp-  I have no idea what this should be changed to?

gre(generic routing encapsulation)-  No idea what this should be changed to?

 

Any help would be appreciated.  

 

 

 

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @mamuhopo ,

 

These IP protocols need to be changed to applications.  You are correct that ICMP should be changed to ping.  Be aware that non-ping ICMP is now blocked but previously allowed on the ASA.  The protocols ipsec-esp and gre have applications of the same names in PA.  https://applipedia.paloaltonetworks.com/

 

Typically, these changes need to be made in the security policy in Expedition.  I clone the L4 rule and create a new L7 rule with the new applications.  Check out the "Replace Services by App-ID" section here -> https://live.paloaltonetworks.com/t5/expedition-articles/expedition-user-guide-v1-2/ta-p/285157#toc-....

 

Thanks,

 

Tom

 

Help the community: Like helpful comments and mark solutions.
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!