Moving this discussion from another post to hopefully get some Miner node troubleshooting advice.
My Miner's aren't pulling in additional feeds after installing from these instructions:
Here's where I'm at...
-Running version 0.9.30
-System tab says everything is running
-Nodes show they are connected but haven't pulled in any additional indicators
-I stood up the VM last week and it initially pulled in 909 indicators but hasn't changed since then
Troubleshooting so far...
-Committed configs after adding nodes
-Checked status with "sudo -u minemeld /opt/minemeld/engine/current/bin/supervisorctl -c /opt/minemeld/local/supervisor/config/supervisord.
-Checked all network Firewall and IPS logs (nothing blocked)
-Tried updating MineMeld with "sudo /usr/sbin/minemeld-auto-update" (no updates)
-I checked the MineMeld GUI logs and I'm not seeing anything past the initial install on 1/6/2017
-Manually checked two of my node feeds directly from Ubuntu with no issues:
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!