10-22-2018 08:08 AM
Hello,
What are you attempting to monitor, like up down status?
Regards,
10-22-2018 08:12 AM
No thats the easy part knowing if it is up or down, just watch the green balls LOL. I guess I was hoping to see something in the traffic logs but technically I probably have an encrypted tunnel that by passes all that and come right into the network. Guess I am checking to make sure that is normal and I have it set up correctly
10-22-2018 08:24 AM
Hello,
If your PAN is the ipsec endpoint, then it will see the decrypted traffic. What I do is alwyas have the tunnel a different zone so I can create policies around the traffic. Also I can watch the traffic by selecting the source and destination zones.
Regards,
10-22-2018 08:27 AM
I created a rule to let the traffic in but when I search by the rule it shows no traffic passing on it so to speak though it is clearly being hit. I don't use panorama at all if that is why you are referring to as PAN
10-22-2018 08:31 AM
Try searching by a known IP address on the tunnel as the source and see which policy it is hitting.
10-22-2018 09:00 AM
Maybe as destiantion and ping it so you can see traffic? Perhaps there is no traffic going over it (long shot I know).
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
