Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
08-24-2018 02:23 AM
Hello guys,
I need to create additional virtual system on a 3020 cluster. Said that I have installed a regular multi-vsys license, I have enabled the multi-vsys capability (Device-Setup-General) on both devices.
Now on both of them the HA state (active-passive) is SUSPENDED with the "multi-vsys mismatches with peer" error.
But apart from enabling the capability I haven't done nothing else.
Any ideas?
The PanOS is 8.0.10.
Thanks!
08-24-2018 04:08 AM
Have you tried rebooting or to make them functional from operational commands?
In my experience, when multi-vsys is enabled on an online HA pair this hapens every time - I suspect they suspend themselves due to the mismatch after the first is set to multi-vsys and don't automatically check again after the second is set. Usually manually un-suspending them works for me.
08-24-2018 02:50 AM - edited 08-24-2018 08:17 AM
Edit: what was written here was useless ...
08-24-2018 02:59 AM
Yes, I even tried a "commit force" on both just to be sure
08-24-2018 04:08 AM
Have you tried rebooting or to make them functional from operational commands?
In my experience, when multi-vsys is enabled on an online HA pair this hapens every time - I suspect they suspend themselves due to the mismatch after the first is set to multi-vsys and don't automatically check again after the second is set. Usually manually un-suspending them works for me.
08-24-2018 05:05 AM
Thanks Joe! It worked, it was really that simple. Strange behaviour..
Now I have create the new virtual system and associated the interfaces. I have another question..
I wish to use one single phisical interface as the outside interface for any virtual systems. How can I do that? Leave that to the first vsys and then point at that with the virtual routers on the other vsys?
Thank you so much
08-24-2018 08:15 AM - edited 08-24-2018 09:12 AM
One vsys needs to be associated with one interface - or subinterface. But what you are actually searching (as I assume) is to use only one interface for all vsys without subinterfaces, right?
In this case, the shared gateway feature could be something for you:
https://www.paloaltonetworks.com/documentation/80/pan-os/pan-os/virtual-systems/shared-gateway
08-24-2018 09:01 AM
Thank you so much, remo
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
