Multiple IPSec tunnels, single external IP

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Multiple IPSec tunnels, single external IP

L0 Member

Looking to set up a POC with a PA-820 that has the following

  • IPSec VPN site-to-site between our local facility and 3 partner networks
  • Single external IP, 3 tunnels (IKE P2)
  • NAT to a single host on our local private network

Is this reasonable/possible?

1 REPLY 1

L6 Presenter

Hi @digdoug ,

 

You can create multiple IPSEC tunnels from your Palo Alto’s single external IP and different partner external IPs.

Only thing you need to make sure of properly defining the VPN encryption domain, security and/or NAT policies and routing to differentiate traffic and forward it to right tunnel interface.

 

Hope it helps!

M

Check out my YouTube channel - https://www.youtube.com/@NetworkTalks
  • 3304 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!