Multiple outgoing connections

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Multiple outgoing connections

L2 Linker



I was told to allow "multiple outgoing connections" from an inbound server to a public server.

I see SSL outgoing packets but no response.


I do not know how to allow multiple outgoing connections.




Cyber Elite
Cyber Elite

I'm a little lost on what you mean by "multiple outgoing connections"? Do they want you to NAT more ports to the internal servers Public IP address, or do they simply mean to say that the Public IP address is only allowing one connection from your company at a time?

L7 Applicator

Is there a particular problem with the communications?  I'm assuming your server is not able to successfully communicate with the public server since you have outbound traffic with no response.


If this is the case, do you have ssl decryption setup for this communication?  You may want to turn it off as a test to see if this is part of the issue.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

Cyber Elite
Cyber Elite


Also check the logs in the monitoring tab to see where they are getting blocked.



Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!