NAT over IPSEC VPN without an IP on the Tunnel interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

NAT over IPSEC VPN without an IP on the Tunnel interface

L0 Member

Does anyone know if it is possible to NAT over an IPSEC VPN without assigning an IP address on the tunnel interface itself?

 

I tried but it doesn't seem possible.

 

Help!

 

Thanks,

 

Duane

3 REPLIES 3

L2 Linker

What kind of NAT are you trying to do?

It is possible to do dynamic-ip-and-port source NAT for sure, I haven't triend other scenarios.

Cyber Elite
Cyber Elite

Hi Duane

 

you can try adding a loopback interface in the same zone as the vpn interface, then create a nat rule using dynamic ip+port and nat sourced from the loopback

 

2016-02-29_08-13-10.png

2016-02-29_08-14-57.png

 

depending on your remote peer you may need to account for this by using proxy-IDs

2016-02-29_08-17-12.png

 

hope this helps

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

L3 Networker

If you want to  configure a NAT rule you should be having an ip address on the interface either statically or assisgned via DHCP

 

Else that will  be a Not nat rule for the traffic

 

Are you trying to  use tunnel interface in NAT rule  ? 

  • 2197 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!