NAT to VLAN Interface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

NAT to VLAN Interface

L0 Member

I would like to NAT to a VLAN virtual Interface that has two physical ports attached to the same VLAN.  I am assuming this should be easy but am not finding alot of documentation.  Basically I want to create a vlan interface, assign an IP to it and then assign two physical ports to the vlan so two devices can be attached.  The two devices should be able to talk to each other switched through the two vlan ports, and to the natted host on the other side of the PA firewall.  Can anyone help?

1 REPLY 1

L7 Applicator

Hi @DoDo1975 

 

What you want to configure ia a layer 2 deployment and this is documwnted here:https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/networking/configure-interfaces/layer-2-in...

  • 2131 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!