- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-11-2021 10:04 AM
Hi
I wanted to update weak ciphers on a PA-VM using the document below, I wanted to apply the change via Panorama but I don't see the correct config to apply.
I have tried the following:
>set cli config-output-format set
#set template "template name" config vsys vsys1
Is this the correct format? I am not sure where I can reference system ssh and the rest of the commands in the document.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PN5bCAG
Any assistance would be appreciated.
Thank you
-Amin
02-17-2021 05:01 AM
These appear to need to be run from the individual firewall's mgmt interfaces and not via a template in Panorama.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!