Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-01-2018 04:54 PM - edited 02-01-2018 04:59 PM
All,
I am new to Palo Alto World
Really need your Help in understanding how can i create the VPN for the below
1. IBM cloud subnet only 1 subnet so thats okay.
2. Multiple subnets behind my PA firewall, my question is how to NAT them all to go out?
IBM just confirmed that they are using ROUTE based VPN , so i believe i do not need to define proxy IDs?
Customer at my end says you can NAT all our internal traffic . they have given me a private IP subnet to nat the traffic over the VPN however they also need some hosts to hosts bidirectional communication .
Please suggest how to setup this VPN.
02-02-2018 01:01 AM
please take a look at this article, it is similar and maty be helpful: DotW: Help with IPSec Proxy IDs with overlapping IPs
Since they are route based, this will simplify your config somewhat (you dont need proxy IDs)
on your end you'll need to set a couple of policies :
for the bidirectional IP's i'd recommend creating individual back and forth policies, this makes it a little more clear which policies are used:
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
