Network slowness after changing the fw

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Network slowness after changing the fw

L1 Bithead



We have change a PA3020 devices cluster, with a PA3220 cluster. After changing them we are having slowness issues in the network.


After doing some troubleshooting we have seen that the issue is with SMB and also with the Internet connection. If we do a failover it seems to work better but it still is slow.


The configuration is the same as the 3020. Is there something different between the devices to affect to the network performance?




Cyber Elite
Cyber Elite

There is better chip sets in the newer hardware, so I am not immediately aware of where the issue could be at.





Help the community: Like helpful comments and mark solutions



Thank you for the fast response!


We have change again the FW to ensure that the network works fine. Actually we'ce got access to the new FWs but they are not connected to network.


How can we check if there any issue with the new chipset?



Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!