Not packet returned via subinterface

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Not packet returned via subinterface

L3 Networker

Lan2(trust zone-172.16.10.0/24)-> internal  -                switch from trunk->       (eth1/1-172.16.10.100)PAN FW(eth1/2-192.168.1.104/24)->(192.168.1.1/24) DSL modem(untrust)

Lan2(trust zone-172.16.20.0/24)->connected thro. mpls ->                                 (eth1/1.10-172.16.20.100)

My vr config: Destination:0.0.0.0/0, Interface:eth1/1, Next hop:192.168.1.1/24

my security policy: trust to untrust -any any

my Nat: source nat dynamic and port: 192.168.1.104/24

pinging from 172.16.10.0/24 to internet : allowed,nat applied and successful ping

Pinging from 172.16.20.0/24 to internet: allowed,nat applied but packet not returned to 20.0/24

3 REPLIES 3

L6 Presenter

Hi,

could you please try from CLI - ssh

ping source 172.16.20.100 host 192.168.1.1

ping source 172.16.20.100 host 8.8.8.8

Hi,

Traffic allowed in the firewall.But return packet is failing.Routing table also looking good. I think return packet not going to sub interface(eth1/1.10-172.16.20.100).so ping failed.

so what is the output of these 2 ping command ?

  • 1611 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!