10-19-2012 12:01 AM
Hi All,
On device in policies not showing user names under the source user tab, but in user-id agent we are able to see ip to user mapping. PaloAlto device is connected to machine on which user-id agent has been installed. Is there any other configuration is required to get user names in policies ? Please help me.
Regards,
Guru
10-19-2012 12:18 AM
Verify the LDAP configuration of your PA-box.
Userid-agent is to get the ip <-> userid mapping, LDAP is used to setup security policies (knowing which userid's and groups are available).
10-19-2012 12:18 AM
Verify the LDAP configuration of your PA-box.
Userid-agent is to get the ip <-> userid mapping, LDAP is used to setup security policies (knowing which userid's and groups are available).
10-19-2012 01:26 AM
Hello,
LDAP configuration is not required if you're not using usergroup in the policies.
We had the same problem (on time) with a PA-500.
We upgraded to the last version of the PAN agent and PANOS 4.1.8.
Problem solved...
Regards,
HA
10-25-2012 08:21 AM
Not sure if you already got your question answered, but another thing to check is under Network Tab... Select Zones and make sure the Enable User ID box is checked.
Commit and check logs again.
If you already got your answer then my apologies.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
