So I have an interesting situation
active active setup loopback.2 setup with a failover ip.
How do I add the ip to OSPF, because 1 interface will not have a IP address, so comitting it complains
We did this with a Redistribution Profile that was set to static, priority 10, with all of our floating IP addresses to advertise and made sure it was set to Redist. After that, we went to the OSPF->Export Rules tab and added a new Export Rule using that Redistribution Profile as Ext 2.
This seemed to do the trick as our A/A firewalls are both advertising out routes but only the primary active, which is the master for the failover addresses with how we have it configured, is advertising routes for those floating IPs.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!