Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-17-2016 05:21 PM
I assume I would be able to use a typical Cisco rollover cable (Serial to RJ45) to connect to the console port on a PA-200 but get nothing.
Am I using the wrong type of cable?
03-18-2016 03:04 AM
The baby blue cisco cable should work. Has the device been initialised in CCEAL4/FIPS mode, as that will disable console access.
03-22-2016 11:14 AM
No, the device is not in CCEAL4/FIPS mode. The cable is verified working (works on the PA-3020 we have). I followed the steps to try to disable CCEAL4 (https://live.paloaltonetworks.com/t5/Management-Articles/How-to-Enable-or-Disable-Common-Criteria-CC... but when the device boots nothing displays on the console screen.
Is it possible that the console port on the PA-200 is bad?
03-23-2016 01:31 AM
yes, that's possible
I'd advise you contact support and have them verify. You may need a replacement
10-01-2018 10:30 AM
I am having the same issue with two new PA-5260's
Console cable to laptop works just fine, but rollover cable to console server does not work, but SAME cable works on PA-4050 AND PA-5020.
Something is different with the console port on the 5260's but what ??
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
