PA-220 internet issue

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PA-220 internet issue

L0 Member

Hi, 

 

I bought recently a PA-220 for home as I am very new on Palo alto in order to learn.

 

My current setup is the following :

ISP router -------> PA-220 -------> Netgear router 

I've set the zones, virtual router etc, policy. 

I am following that article https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFkCAK

For some reason I can't get the PAN to the internet.

My question is, my ISP router is on DHCP, should I set the in1/1 (untrusted zone) on DHCP and then the int1/2 on static?

Not sure either if PA-220 needs to be on DHCP.

 

Thanks,

 

1 REPLY 1

L2 Linker

Hi,

 

you can configure the interface of your PA on your DHCP server to have a static-entry.

i think it is recommanded that your PA ip address with your setup will have a static ip address, since you cant have its ip address change for some reason.

hoope this helps.

 

  • 503 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!