PA-3220 HSCI port's LED is not light up

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA-3220 HSCI port's LED is not light up

L3 Networker

I've got two new PA-3220s in HA (active/passive). Active firewall's HSCI port does not light up green LED, whereas passive light up green. I used an SFP+ and MM cable (tried Twinax as well). I have a replaced firewall for active firewall, but it still doesn't up. However, all HA state looks fine on the Dashboard/High Availability.

Is this something expected behavior?

 

Active firewall - no HSCI LEDActive firewall - no HSCI LEDPassive firewall - HSCI okPassive firewall - HSCI ok

--
"The Simplicity is the ultimate sophistication." - Leonardo da Vinci.
1 REPLY 1

L3 Networker

I submitted RMAs twice and got a good firewall. I couldn't believe that three firewalls were bad. That was a once-in-a-lifetime experience!

--
"The Simplicity is the ultimate sophistication." - Leonardo da Vinci.
  • 2710 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!