last week 95% root partition usage alarm, then I clear disk space
last week deleted base image wrongly then i try to download again but failed in web
then today I power socket is unplugged and restarted, ethernet 1/1 not function
uploaded manually 10.0.0 and 10.2.0 it show uploaded
but it can not load base image after restart, now ethernet 1/1 can not have function and light
firewall is totally out of function
I try to change IP address of management interface with subnet of wifi router
but commit force failed due to certificate error
there is no other ports to download 10.0.0 image through internet
what should I do now?
Might be a good time to run a factory reset to clear your system from clutter and to get a fresh start for PAN-OS
don't forget to export your config file, factory reset to your current PAN-OS, upload the config file and you should be good to go
I have factory reset , connected outside port with wifi router
originally see two light flashing at outside port
but after snapshot config load or may be after a while , the outside port has only one left light on , and DHCP of outside vlan
originally can get ip address but after a while , the DHCP client of outside vlan back to initial state
can not get IP address, then i set fixed IP address, it still one left light on, the other light is off
is recent DOS vulnerability make ethernet ports malfunction ?
I have requested RMA, but afraid of this happen the same , I think the difference is start from 9.2 I will not import snapshot config
in the beginning but configured to get license first
the base image is deleted in software , I do not know whether maintenance mode get the version 9.2
because when it boot , it show 10.2 banner , now can not get license because outside port has problem
the one light is 'link' the second light is 1gbps (100mbps has only 1 light) so you may need to play areound with your speed and duplex settings on that interface to match whatever you are connecting to
sounds like the upstream device may have a static configuration or incompatible auto sequence
I know the problem now
there is another interface using the same network address and netmask same as DHCP client
now it can online now
but validate old image 10.0.0 and 10.2.0 has no selection to validate
though I do not know where it get base image of 10.2 , I do not dare to delete 10.0.0 and 10.2.0 to download through internet again
because previously it failed to download
I just afraid next time it reboot or restart , it will need to factory reset again
today afternoon, support said SSL decrypt need default certificate
then I enable back certificate of china, hong kong ,japan korea , taiwan and thailand default certificate,
but there is no save button to save change and no commit need
then I change one of interface static IP address, still no commit and no save changes
then I change from super user to admin user
and find no need to commit change, the certificate had already been enabled
why it bypass save change and commit after change IP address of unused interface?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!