Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-06-2018 12:06 PM
Hi folks
Have pair of 5220s in Active/Passive HA. I'm reading that multiple zones cannot be used on VWire, well actually i'm finding that documentation not so clear and it could be functionality added in later releases of code.
Anyway let me try to explain. I wish to bond (AE) eight + eight 10Gig interfaces to forming a single 80Gig VWire. Each end of the VWire will physically attach to Cisco switch capeable of LACP if needed.
Once the single VWire is set-up, can multiple Subinterfaces and Zones be configured and allocated across different vSys's?
Many thanks
Ajaz Nawaz
JNCIE-SEC No.254
CCIE-RS No.15721
02-06-2018 01:25 PM
hi @nawaza
yes, you can create (vwire) subinterfaces and then you will be able to configure unique zone pairs for each subinterface
02-06-2018 03:25 PM
02-06-2018 03:56 PM
Hello,
Yes there is a way. Check these out and let us know if they help.
Cheers!
02-07-2018 03:01 AM
FWs are in HA Active/Passive as stipulated in OP
This will be interesting, if it works...
02-07-2018 02:40 PM
Please post your results. Its an interesting scenario for sure and a lot of bandwidth :).
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
