PA-850 High Availability Cabling

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA-850 High Availability Cabling

L0 Member

Can we separate the PA-850 two of HA boxes using Fiber to Copper Media Convertor in case I want to keep both boxes in different buildings to achieve HA  ( our boxes are in Active-Passive mode ) ? 

Current configuration of HA is on Copper Ports.

 

2 REPLIES 2

Cyber Elite
Cyber Elite

Hi @GajananDixit ,

 

Yes, it can be done.  Check out this discussion -> https://live.paloaltonetworks.com/t5/general-topics/high-availability-for-firewalls-in-diferent-loca....

 

You can use IP addresses for your HA2 links so they can route across your network.  In that scenario, PANW recommends encrypting the traffic.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.

Cyber Elite
Cyber Elite

@GajananDixit,

If you're going to use a media converter the only thing I would really caution is using cheap devices for these links. I'd recommend spending the money for a managed unit so that you can monitor for faults outside of the interface just failing. 

  • 1034 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!