- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
08-12-2024 01:21 AM
hello,
we have setup Active/ Passive connected with cisco stacking 9500 with four links full-mesh as shown below:
Paloalto active:
PA(active) AE1 ========= cisco-1 switch (Etherchanel 10)
PA(active) AE1 ========= cisco-2 switch (Etherchanel 20)
Paloalto Passive:
PA(passive) AE1 ========= cisco-1 switch (Etherchanel 10)
PA(passive) AE1 ========= cisco-2 switch (Etherchanel 20)
=================================================
Is the connection and configuration is correct or i should create 2 channels from Paloalto side like this example?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!