- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
07-19-2011 10:53 PM
Hello team.
When configuring Layer 2 of interface that support spanning-tree protocol? or not?
PA can be used SPT root bridge and sending recieving BPDU packets?
Thanks.
Regards.
Roh.
07-20-2011 08:26 AM
Roh,
When you set the interface on PA to Layer2 mode, the PA will pass BPDU's it receives to other L2 interface. PA does not take part in spanning tree protocol and cannot be root bridge since it does not participate in SPT. Hope this helps.
Thanks
07-20-2011 08:26 AM
Roh,
When you set the interface on PA to Layer2 mode, the PA will pass BPDU's it receives to other L2 interface. PA does not take part in spanning tree protocol and cannot be root bridge since it does not participate in SPT. Hope this helps.
Thanks
08-16-2011 08:02 PM
If passing all bpdu without processing - Is it also applicable for BPDUs from un-trusted side? Do you have any commands and documents layer 2 traffic and operations on PA and also HA link states Thanks
03-26-2014 07:19 AM
Does this behavior change if the Palo Alto are doing VLAN translation?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!