03-07-2020 05:26 AM
Hello,
I've configured up two interfaces on my PA-VM (management 10.0.64.3 with VMnet0 - 10.0.64.0/24 and data with VMnet1 - 10.0.0.0/16). Management is directly connected to PC with Windows and Ethernet 1/1 to FastEthernet0/0 on my switch. I've configured trunk on FastEthernet 0/0 and i've problem with interzone routing. Any solutions?
03-07-2020 08:57 AM
You sure that i must change type of adapter to bridged? In this situation i must create next vmnet host-only adapters for workstations? Configuration of switch is correct?
03-07-2020 09:07 AM
In this lab Palo Alto would be a router without access to Internet. This is only LAN segmentation on vlans (16 - LAN_IT, 32 - LAN_USERS, 64 - MANAGEMENT, 128 SERVERS). I can't ping host or gateway in other zone
03-07-2020 10:12 AM - edited 03-07-2020 10:14 AM
Sorry, I missed the third screenshot in your initial post that you have everything virtually on your computer. In this case of course host-only is correct.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
