PA-VM interzone routing

Showing results for 
Search instead for 
Did you mean: 

PA-VM interzone routing

L1 Bithead


I've configured up two interfaces on my PA-VM (management with VMnet0 - and data with VMnet1 - Management is directly connected to PC with Windows and Ethernet 1/1 to FastEthernet0/0 on my switch. I've configured trunk on FastEthernet 0/0 and i've problem with interzone routing. Any solutions?1.PNG2.PNG3.PNG4.PNG5.PNG


Cyber Elite
Cyber Elite

Hi @Werpet 

You ned to change the adapter type of VMNet1 to "Bridged". With "Host-only" this - as the name implies - only a local/internal network on the VMWare host.

You sure that i must change type of adapter to bridged? In this situation i must create next vmnet host-only adapters for workstations? Configuration of switch is correct?


In this lab Palo Alto would be a router without access to Internet. This is only LAN segmentation on vlans (16 - LAN_IT, 32 - LAN_USERS, 64 - MANAGEMENT, 128 SERVERS). I can't ping host or gateway in other zone

Sorry, I missed the third screenshot in your initial post that you have everything virtually on your computer. In this case of course host-only is correct.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!