02-27-2017 01:33 PM
Hi
Iam a proud owner of a pa-200 - updated to 8.0.0
and i was wondering if there is a updated step by step guide to configure GlobalProtect with a dynamic ISP provider (unstable ip) possible to use a loopback interface ? and Certificate.
02-27-2017 03:20 PM
Congratulations on the PA-200.
As far as setting up GlobalProtect, we have many guides on it.
https://live.paloaltonetworks.com/t5/Management-Articles/GlobalProtect-resource-guide/ta-p/70472
But as far as getting the Firewall to act as a Gateway but with a Dynamic IP.. that one is not possible, as a static IP address is needed.
If you would like to configure a loopback IP address on the GlobalProtect Gateway, we have this document:
How to Configure Global Protect Gateway on Loopback Interface
I hope this can help.
Regards,
Joe Delio
02-27-2017 03:23 PM
Also, this is the feedback area for the Live Community.
For any questions, they should be directed to the General Topics area here:
https://live.paloaltonetworks.com/t5/General-Topics/bd-p/members_discuss
I will be moving this to that forum now.
02-27-2017 11:54 PM
nice! Thanks for the resource guide link.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
