pa200 connect to dsl modem


Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

L3 Networker

pa200 connect to dsl modem

I want to connect PA200 to a netcomm wireless modem. I haveseen config where dls modem and wireless router are separate. Need help with connecting PA200 to netcomm box.

L7 Applicator

Your best solution would be to contact your DSL provider and ask for either:


1- a Bridge only modem

2-Instructions for putting your DSL router into bridge mode with PPOE on the modem


This then allows you to just put your internet interface on the PA200 into dhcp client mode and directly onto the internet.


Otherwise your PA will be on a private address behind the DSL modem/router.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!