- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
06-12-2019 06:56 AM
Hi,
We have a PA200 which takes a long time to reboot. its like 13 minutes. Is that normal for PA220 ?? any way to know why its taking this time?
06-12-2019 09:24 PM
Seems me also have same issue long reboot time
06-12-2019 07:13 AM
That would be expected before it's fully operational.
06-12-2019 07:14 AM
14 minutes is the expected time? is there any official link from PA indicating this Pa220 slowness?
06-12-2019 07:18 AM
Nothing official that I can find at a glance, but plenty of articles complaining that the boot time on a PA-220 is expected to be anywhere between 10-15 minutes depending on a few different factors. Boot time is notoriously long on Palo Alto's lower end models.
06-12-2019 09:25 AM
Only 13 minutes! you are doing well then... 13 minutes is probably the fastest time you will see. Once you have a fairly large configuration you may see up to 20 or so minutes. This is "normal" for a 200/220
06-12-2019 09:24 PM
Seems me also have same issue long reboot time
02-16-2023 01:52 PM
It took me 22 minutes in my case....
09-10-2023 02:46 AM
Glad I found this topic, same issue.
I find them to be slow in general, when something is committing and you minimalize it to lookup some other stuff. That will test your patience
08-01-2024 05:17 PM
I topped that with 25 minutes haha
08-08-2024 05:45 PM
its almost 24min and i am still waiting for the firewall GUI page..
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!