PA440 not shuting down instead getting rebooted after sometime .

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PA440 not shuting down instead getting rebooted after sometime .

L1 Bithead

Hello 

I am trying to shutdown the device using CLI and GUI but it is getting reboot after some time .

 

Click on Device tab > Setup link > Operations tab. Click on shutdown device under device operation 

shutdown command (request shutdown system) in the CLI.

PAN-OS 10.2(10.2.3-h4),

 

Please help me with the issue .

5 REPLIES 5

Cyber Elite
Cyber Elite

@nabin.sutradhar,

Have you consoled into the device to maintain a connection and viewed any activity once you've run request shutdown system? The only way that this device should be restarting once PAN-OS is shutdown is when/if the power is pulled and re-applied. Do you possibly have dirty power at the site where this PA-440 is installed?

I'd personally use something that can record output like Putty and let it do it again. Then you can review the output log, but this seems more like it could be dirty power. 

Hello 

Its a brand new device and we have setup the device and wanted to ship to device to customer location ,hence when we shutdown the device via CLI or UI ,its get rebooted after 12 mins ,please find the attached logs .

It was expected to have this device in shutdown state ,so that we could remove the cable and ship it to customer but its rebooting and we are able to login again after 12-13 mins .

Please find the detailed attachment on console output after we perform shutdown .

You can ask PAN for tracking PAN-189587.

PAN recognizes this issue and trying to fix it, but it's not fixed yet.

This issue should be seen with PA-400 series and the fix is needed not only on PAN-OS level but also BIOS level as I heard.

Hello , I am not able to find the same on the sites of PAN for PAN-189587 issue .

 

  • 3034 Views
  • 5 replies
  • 1 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!