Palo Alto SDWAN zone

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Palo Alto SDWAN zone

L2 Linker

I am deploying Palo Alto SDWAN and the hub currently terminates dedicated L2 WAN circuits for each remote site. My plan is to build tunnels to each site across their dedicated L2 WAN and across the Internet. Example:

 

Palo Hub connects to site 1 on e1/1.100, zone: site1

Palo Hub connects to site 2 on e1/1.200, zone: site2

 

The current security policies all reference the existing zones: site1, site2, etc. when I build my SDWAN tunnels using autoVPN then tunnels all use "zone-to-branch" zone which is not what I want to use. How can I get the AutoVPN tunnels to use the existing site one names? Is this possible?

1 REPLY 1

Cyber Elite
Cyber Elite

@BBartik,

I don't believe that it's possible to change the security zone that Auto VPN applies when its being utilized. You'll want to add the zone into your existing entries if you plan on using Auto VPN to handle the configuration. 

  • 1541 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!